fbpx

HOTLINE

AU: 1300 387 587

NZ: 0800 106 266

SYSTEMAIRE
KITCHEN EXHAUST FANS

Systemaire Kitchen Exhaust Fans

Systemaire commercial kitchen exhaust fans provide powerful performance, energy efficiency and quiet operation. They have been designed and tested by our own Fantech engineering team and have proven to be up to 9dB(A) quieter, and produce up to 35% more air flow than other equivalent kitchen exhaust fans.

These high performance kitchen exhaust fans are available in 250, 300, 380 and 460mm fan inlet sizes.

Features

Can produce up to 88% more pressure and be up to 9dB(A) quieter than equivalent kitchen exhaust fans currently on the market.

Greater number of drainage holes included around base to prevent water build-up.

Lightweight design for easier handling and installation.

Supplied with matching flange for quick installation to suit standard round Spiro duct.

Flanges suit standard round Spiro duct.

Can be used with smaller duct sizes as the fan can handle high pressure levels.

Designed to handle clean air, grease laden air, toxic and noxious gases.

Advanced mixed flow impeller design provides high air flow performance with low noise levels.

Designed for small to medium sized commercial kitchens in restaurants, cafes and take away food outlets.

MODEL NO.ABCDAPPROX.
WEIGHT KG*
KU_252604435358014
KU_30.L3124435358014
KU_303125541673022
KU_383845543973027
KU_464645546473030

Dimensions in mm
* Unit weights depend on the make of motor used. If critical this should be referred to our sales department at time of order.

 

Components

1. Aerodynamic shaped cowl for smoother air flow, reduced turbulence and increased fan performance.

2. Weather and contaminant proof enclosure for maximum motor protection.

3. Smaller exhaust opening than traditional kitchen exhausts fans reduces exposure to rain.

4. Removable wind band for easy cleaning and maintenance.

5. High performance mixed flow impeller provides quieter operation with better air flow and higher pressure development.

6. Greater number of drainage holes included around base to prevent water build up.

Avg. dB(A) @3M
Model No.m³/h*L/sec*Fan Speed rev/secPhaseKWAmpsInlet SoundOutlet Sound
KUD254172848024Three0.250.754448
KUE254172848024Single0.181.44751
KUD304L252070024Three0.250.754650
KUE304L252070024Single0.181.44549
KUD304288080024Three0.250.754448
KUD306180050016Three0.251.323438
KUE304288080024Single0.181.44550
KUE306180050016Single0.252.53640
KUD3845940164024Three0.751.945156
KUD3863600100016Three0.371.324145
KUE3845940164024Single0.754.85054
KUE3863600100016Single0.372.54044
KUD4648100225024Three1.12.575460
KUD4664788133016Three0.371.324248
KUE4648100225024Single1.16.65359
KUE4664788133016Single0.372.54349

* Air flows are approximate only and based on 30Pa static pressure.

Variable Speed Drives

Danfoss VLT – HVAC FC131

The VLT – HVAC FC131 is a dedicated drive that is easy to install, and features
a trouble-free set up which ensures it is fast and efficient to commission.
It incorporates a highly effective heat management system that makes it ideal for demanding environments and where drive space is restricted.

Features

User friendly interface with start-up wizard for quick and easy configuration.

Integrated PI controller for smooth variable speed control.

EMC filters to remove electromagnetic interference and lower harmonic levels.

Fire mode function with quick start wizard.

Available as IP54 rated.

Danfoss VLT – Micro FC51

The VLT – Micro drive has been designed for applications where simplicity and efficiency are key requirements. The compact size of the enclosure with forced cooled heat sink allows the drive to be installed into confined spaces.

Features

Interface with start-up wizard for quick and easy configuration.

EMC filters to remove electromagnetic interference and lower harmonic levels.

Available as IP20 (with optional IP21 kit).

Optional 1ph input to 3 phase output (0.18 – 2.2kW).

Wall Plate Speed Controllers

2-speed rotary switch
(TSS1-15).
Use with VSD,
415V, 3PH units

0-10V speed controller
(DCV-POT10K-WM)
Use with VSD,
415V, 3PH units

Variable speed controller
(VA2.0, VA5.0, VA8.0 for
240V, 1PH, 4 pole units)