RAPID RESPONSE
HEADER BOX EXHAUST FAN


Rapid Response Fan Body

The Response header box exhaust fan is the quietest and most powerful in its class. It includes features such as a unique swing clip and removable spigot that makes it very easy to install. There are two sizes available; an 8 inch model and a 10 inch model. Both are available with a run-on timer.

Features

The ultra quiet 8” model is ideal for odour and dampness removal from toilets, ensuites and cupboards.

10” model provides stronger air flow performance to ensure steam is cleared from rooms such as bathrooms and ensuites.

Advanced impeller and housing design provides powerful air flow and minimises noise.

Can be retrofitted into an existing standard 8” and 10” round fan cut out.

Low resistance non-return backdraft damper maximises air flow performance.

Efficient motor for high perfoMatching grilles are easy to remove, which makes cleaning easy.

Includes sealed for life ball bearings.

High strength swing clips make installation easy.

Available with a modern square or round grille. Square grille can be easily rotated to align with walls.

Both models available with 3-15 minute adjustable run-on timer (RESPF150T and RESPF8-T).


Standard Grilles

The stylish and modern Rapid Response grille is available in round and square designs with white or black finish (black finish only available with 10” model).

Features

Innovative design allows grilles to be easily removed for cleaning

Available in 2 sizes to suit 8” and 10” Rapid Response header box fan

Quick and easy to install to fan body

Can be retrofitted to a previously installed Rapid Response fan


Grilles with LED

The Rapid Response grille with LED light will brighten up any bathroom, ensuite, powder room or toilet. They are quick and easy to install, and feature a stylish, modern design to suit any setting. For added convenience the LED light can be controlled separately to the fan.

Features

Available in round and square designs with white finish.

Available in 2 sizes to suit 8” and 10” Rapid Response fan.

8” LED model is ideal for toilets and powder rooms, as it combines both a fan and light in-one.

Can be retrofitted to a previously installed Rapid Response fan

Grilles can be easily removed for cleaning.

Complies to: AS/NZS 60598.2.2:2001 and AS/NZS 60598.1:2013 Certificate No.: SAA152082

Dimensions

Fan Body

Model No.Cut Out AØBC*D**
RESPF8250195105/17094/120
RESPF8-T
RESPF150290197170120
RESPF150T

Grilles

Model No.DescriptionA□BD
RESPG8-SQWH8" Square Grille White Finish30028
RESPG8-SQWH-LED8" Square Grille White Finish with LED light30028
RESPG8-RNWH8" Round Grille White Finish29419
RESPG8-RNWH-LED8" Round Grille White Finish with LED light29419
RESPG150SQWH10" Square Grille White Finish35330
RESPG150SQBK10" Square Grille Black Finish35330
RESPG150SQWH-LED10" Square Grille White Finish with LED light35330
RESPG150RNBK10" Round Grille Black Finish33224
RESPG150RNWH10" Round Grille White Finish33224
RESPG150RNWH-LED10" Round Grille White Finish with LED light33224

All dimensions in mm

Technical Data

Fan Body

Model No.Air Flow m3/hr†Air flow L/sec†Fan Speed rpmAVG. dB(A) @ 3mWattsVoltsRun on Timer
RESPF8216609502930230-240No
RESPF8-TYes
RESPF150349979503760230-240No
RESPF150TYes

† Air flow without duct and fittings

SPECIAL NOTE
Timer model RESPF150T and RESPF8-T includes a plug and lead to suit HPM 33, or Clipsal 413/4P bases (with 4 pin sockets).

 

LED Grilles

ModelGrilleLumens (LM)Input Power (W)Colour Temp (K)Beam Angle (°C)
RESPG8-SQWH-LEDSquare1000124200180
RESPG8-RNWH-LEDRound80094200180
RESPG150SQWH-LEDSquare1000124200180
RESPG150RNWH-LEDRound80094200180

Installation

Fan Body

1. Rotate swing clips to hold fan body in place.
2. Tighten screws so clips clamp onto ceiling board.

Long clip-in spigot makes installation & duct connection easier.

Square Grilles

Round Grilles

1. Push grille onto fan body until the clips click into place.

2. Rotate grille to the desired position.

1. Bring together the ends of the metal spring clips.

3. Repeat Steps 1 and 2 for second metal spring clip

2. Feed metal spring clips through the small slots on the fan body

Also Available

Rapid Response Ceiling Grille with Clip-in Spigot

All dimensions in mm

Model No. RCG150SQWH

The modern looking Response Ceiling Grille has been designed for ducted systems using an in-line fan and external grille. It features a clip-in spigot that can be positioned for horizontal or vertical duct connection.

Can be retrofitted into a standard 10” round fan cut out.

Unique ‘push-out’ ceiling clamps make installation easy.

Clip-in spigot makes installation and duct connection easier.

Grille can be easily rotated to align with the walls and removed for cleaning.

Spigot can be mounted horizontally or vertically.

Oval spigot designed to fit 150mm duct.

Rapid Response Fan Kits

Includes Response ceiling mounted header box exhaust fan with grille, 6m duct & external grille.